UpdateSecurityRuleDetails

class oci.core.models.UpdateSecurityRuleDetails(**kwargs)

Bases: object

A rule for allowing inbound (`direction`= INGRESS) or outbound (`direction`= EGRESS) IP packets.

DESTINATION_TYPE_CIDR_BLOCK = 'CIDR_BLOCK'

A constant which can be used with the destination_type property of a UpdateSecurityRuleDetails. This constant has a value of "CIDR_BLOCK"

DESTINATION_TYPE_NETWORK_SECURITY_GROUP = 'NETWORK_SECURITY_GROUP'

A constant which can be used with the destination_type property of a UpdateSecurityRuleDetails. This constant has a value of "NETWORK_SECURITY_GROUP"

DESTINATION_TYPE_SERVICE_CIDR_BLOCK = 'SERVICE_CIDR_BLOCK'

A constant which can be used with the destination_type property of a UpdateSecurityRuleDetails. This constant has a value of "SERVICE_CIDR_BLOCK"

DIRECTION_EGRESS = 'EGRESS'

A constant which can be used with the direction property of a UpdateSecurityRuleDetails. This constant has a value of "EGRESS"

DIRECTION_INGRESS = 'INGRESS'

A constant which can be used with the direction property of a UpdateSecurityRuleDetails. This constant has a value of "INGRESS"

SOURCE_TYPE_CIDR_BLOCK = 'CIDR_BLOCK'

A constant which can be used with the source_type property of a UpdateSecurityRuleDetails. This constant has a value of "CIDR_BLOCK"

SOURCE_TYPE_NETWORK_SECURITY_GROUP = 'NETWORK_SECURITY_GROUP'

A constant which can be used with the source_type property of a UpdateSecurityRuleDetails. This constant has a value of "NETWORK_SECURITY_GROUP"

SOURCE_TYPE_SERVICE_CIDR_BLOCK = 'SERVICE_CIDR_BLOCK'

A constant which can be used with the source_type property of a UpdateSecurityRuleDetails. This constant has a value of "SERVICE_CIDR_BLOCK"

__init__(**kwargs)

Initializes a new UpdateSecurityRuleDetails object with values from keyword arguments. The following keyword arguments are supported (corresponding to the getters/setters of this class):

Parameters:
  • description (str) -- The value to assign to the description property of this UpdateSecurityRuleDetails.
  • destination (str) -- The value to assign to the destination property of this UpdateSecurityRuleDetails.
  • destination_type (str) -- The value to assign to the destination_type property of this UpdateSecurityRuleDetails. Allowed values for this property are: "CIDR_BLOCK", "SERVICE_CIDR_BLOCK", "NETWORK_SECURITY_GROUP"
  • direction (str) -- The value to assign to the direction property of this UpdateSecurityRuleDetails. Allowed values for this property are: "EGRESS", "INGRESS"
  • icmp_options (IcmpOptions) -- The value to assign to the icmp_options property of this UpdateSecurityRuleDetails.
  • id (str) -- The value to assign to the id property of this UpdateSecurityRuleDetails.
  • is_stateless (bool) -- The value to assign to the is_stateless property of this UpdateSecurityRuleDetails.
  • protocol (str) -- The value to assign to the protocol property of this UpdateSecurityRuleDetails.
  • source (str) -- The value to assign to the source property of this UpdateSecurityRuleDetails.
  • source_type (str) -- The value to assign to the source_type property of this UpdateSecurityRuleDetails. Allowed values for this property are: "CIDR_BLOCK", "SERVICE_CIDR_BLOCK", "NETWORK_SECURITY_GROUP"
  • tcp_options (TcpOptions) -- The value to assign to the tcp_options property of this UpdateSecurityRuleDetails.
  • udp_options (UdpOptions) -- The value to assign to the udp_options property of this UpdateSecurityRuleDetails.
description

Gets the description of this UpdateSecurityRuleDetails. An optional description of your choice for the rule. Avoid entering confidential information.

Returns:The description of this UpdateSecurityRuleDetails.
Return type:str
destination

Gets the destination of this UpdateSecurityRuleDetails. Conceptually, this is the range of IP addresses that a packet originating from the instance can go to.

Allowed values:

  • An IP address range in CIDR notation. For example: 192.168.1.0/24 or 2001:0db8:0123:45::/56 Note that IPv6 addressing is currently supported only in the Government Cloud.
  • The cidrBlock value for a Service, if you're setting up a security rule for traffic destined for a particular Service through a service gateway. For example: oci-phx-objectstorage.
  • The OCID of a NetworkSecurityGroup in the same VCN. The value can be the NSG that the rule belongs to if the rule's intent is to control traffic between VNICs in the same NSG.
Returns:The destination of this UpdateSecurityRuleDetails.
Return type:str
destination_type

Gets the destination_type of this UpdateSecurityRuleDetails. Type of destination for the rule. Required if direction = EGRESS.

Allowed values:

  • CIDR_BLOCK: If the rule's destination is an IP address range in CIDR notation.
  • SERVICE_CIDR_BLOCK: If the rule's destination is the cidrBlock value for a Service (the rule is for traffic destined for a particular Service through a service gateway).
  • NETWORK_SECURITY_GROUP: If the rule's destination is the OCID of a NetworkSecurityGroup.

Allowed values for this property are: "CIDR_BLOCK", "SERVICE_CIDR_BLOCK", "NETWORK_SECURITY_GROUP"

Returns:The destination_type of this UpdateSecurityRuleDetails.
Return type:str
direction

[Required] Gets the direction of this UpdateSecurityRuleDetails. Direction of the security rule. Set to EGRESS for rules to allow outbound IP packets, or INGRESS for rules to allow inbound IP packets.

Allowed values for this property are: "EGRESS", "INGRESS"

Returns:The direction of this UpdateSecurityRuleDetails.
Return type:str
icmp_options

Gets the icmp_options of this UpdateSecurityRuleDetails. Optional and valid only for ICMP and ICMPv6. Use to specify a particular ICMP type and code as defined in: - ICMP Parameters - ICMPv6 Parameters

If you specify ICMP or ICMPv6 as the protocol but omit this object, then all ICMP types and codes are allowed. If you do provide this object, the type is required and the code is optional. To enable MTU negotiation for ingress internet traffic via IPv4, make sure to allow type 3 ("Destination Unreachable") code 4 ("Fragmentation Needed and Don't Fragment was Set"). If you need to specify multiple codes for a single type, create a separate security rule for each.

Returns:The icmp_options of this UpdateSecurityRuleDetails.
Return type:IcmpOptions
id

[Required] Gets the id of this UpdateSecurityRuleDetails. The Oracle-assigned ID of the security rule that you want to update. You can't change this value.

Example: 04ABEC

Returns:The id of this UpdateSecurityRuleDetails.
Return type:str
is_stateless

Gets the is_stateless of this UpdateSecurityRuleDetails. A stateless rule allows traffic in one direction. Remember to add a corresponding stateless rule in the other direction if you need to support bidirectional traffic. For example, if egress traffic allows TCP destination port 80, there should be an ingress rule to allow TCP source port 80. Defaults to false, which means the rule is stateful and a corresponding rule is not necessary for bidirectional traffic.

Returns:The is_stateless of this UpdateSecurityRuleDetails.
Return type:bool
protocol

[Required] Gets the protocol of this UpdateSecurityRuleDetails. The transport protocol. Specify either all or an IPv4 protocol number as defined in Protocol Numbers. Options are supported only for ICMP ("1"), TCP ("6"), UDP ("17"), and ICMPv6 ("58").

Returns:The protocol of this UpdateSecurityRuleDetails.
Return type:str
source

Gets the source of this UpdateSecurityRuleDetails. Conceptually, this is the range of IP addresses that a packet coming into the instance can come from.

Allowed values:

  • An IP address range in CIDR notation. For example: 192.168.1.0/24 or 2001:0db8:0123:45::/56 Note that IPv6 addressing is currently supported only in the Government Cloud.
  • The cidrBlock value for a Service, if you're setting up a security rule for traffic coming from a particular Service through a service gateway. For example: oci-phx-objectstorage.
  • The OCID of a NetworkSecurityGroup in the same VCN. The value can be the NSG that the rule belongs to if the rule's intent is to control traffic between VNICs in the same NSG.
Returns:The source of this UpdateSecurityRuleDetails.
Return type:str
source_type

Gets the source_type of this UpdateSecurityRuleDetails. Type of source for the rule. Required if direction = INGRESS.

  • CIDR_BLOCK: If the rule's source is an IP address range in CIDR notation.
  • SERVICE_CIDR_BLOCK: If the rule's source is the cidrBlock value for a Service (the rule is for traffic coming from a particular Service through a service gateway).
  • NETWORK_SECURITY_GROUP: If the rule's source is the OCID of a NetworkSecurityGroup.

Allowed values for this property are: "CIDR_BLOCK", "SERVICE_CIDR_BLOCK", "NETWORK_SECURITY_GROUP"

Returns:The source_type of this UpdateSecurityRuleDetails.
Return type:str
tcp_options

Gets the tcp_options of this UpdateSecurityRuleDetails. Optional and valid only for TCP. Use to specify particular destination ports for TCP rules. If you specify TCP as the protocol but omit this object, then all destination ports are allowed.

Returns:The tcp_options of this UpdateSecurityRuleDetails.
Return type:TcpOptions
udp_options

Gets the udp_options of this UpdateSecurityRuleDetails. Optional and valid only for UDP. Use to specify particular destination ports for UDP rules. If you specify UDP as the protocol but omit this object, then all destination ports are allowed.

Returns:The udp_options of this UpdateSecurityRuleDetails.
Return type:UdpOptions